Mon panier
0 article0,00 $US

HiFiBerry Amp2 Bundle with case, power supply & SD card

The HiFiBerry Amp2 is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi (newer models with 40 pin GPIO connector), that is mounted onto the Raspberry Pi to create a stereo audio system. The speakers just have to be connected directly, which makes it an ideal module for multi-room audio installations.

Prix 125,00 $US

Membres 113,00 $US

Disponible

Ce produit sera expédié dans 3 jours

Détails

The HiFiBerry Amp2 is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi (newer models with 40 pin GPIO connector), that is mounted onto the Raspberry Pi to create a stereo audio system. The speakers just have to be connected directly, which makes it an ideal module for multi-room audio installations.

Mount it onto the Raspberry Pi and you have a stereo audio system. You only have to connect your loudspeakers. It provides up to 60 W power. You only need a single 12-24 V power supply to power the Raspberry Pi and the Amp2. With 4 Ohm speakers, we recommend 12-18 V. Higher operating voltages are only recommended with 8 Ohm speakers. However, even with 8 Ohm speakers an 18 V power supply is the best choice in our opinion.

It powers the Raspberry Pi, there is no need to add an external 5 V power supply to the Raspberry Pi.

The Amp2 is designed to work with all speakers or 4-8 Ohm impedance. It supports sample rates from 44.1-192 kHz (16-32 bit).

The speaker connections are the similar as on the Amp+. Note that the polarity of one channel is reversed compared to the Amp+. Check the prints on the PCB for the correct polarity!

If the software you’re using doesn’t provide the Amp2 as an output option, you should use the HiFiBerry DAC+ driver as the Amp2 is basically a DAC+ with an integrated power stage.

Features

  • Up to 60 W output power
  • Capable of driving a pair of 4-8 Ohm speakers
  • Fully controllable from the Raspberry Pi
  • Sample rates up to 192 kHz
  • Digital-analog conversion included (no need for external DACs or sound cards)
  • Digital sound transmission for optimal audio performance
  • Connects directly to the Raspberry Pi A+/B+/2B/3B(+)/Zero (no additional cables needed)
  • Only one 12-24 V external power supply needed for both Amp2 and the Raspberry Pi, no need for USB power supply anymore
  • The Amp2 is directly mounted on the Raspberry Pi A+/B+/2B/3B(+) in less than a minute (no soldering required)
  • Dimensions: 5.5 x 6.5 x 2.5 cm
  • Weight: 60 g

Bundle includes

  • HiFiBerry Amp2
  • HifiBerry Universal Case (black)
  • Power supply Meanwell GS60A18-P1J (60 W)
  • microSD Card (16 GB, Class 10) with SD Adapter (pre-installed with Volumio)
Réf. 18504
Constructeur HiFiBerry

Video

Rédigez votre propre commentaire

Quelle note donneriez-vous à ce produit ? *

1 2 3 4 5
Qualité
Valeur
Prix
  • Reload captcha

CONTACTEZ-NOUS