Mon panier
0 article0,00 $US

STEMlab 125-14 (Ultimate Kit)

STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing.

Prix 851,00 $US

Membres 766,00 $US

Disponible

Ce produit sera expédié dans 17 jours

Détails

STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.

Features:
• High performance hardware at a surprising price tag.
• Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)
• LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).
• LabView and MATLAB® interface.
• Possibility to make your own application and share it with others.
• Open source software.

RF inputs:
• Number of channels: 2
• Bandwidth: 50 MHz (3 dB)
• Sample rate: 125 Msps
• Input impedance: 1 MΩ / 10 pF
• Connector: SMA-F

RF outputs:
• Number of channels: 2
• Bandwidth: 50 MHz
• Sample rate: 125 Msps
• Load impedance: 50 Ω
• Connector: SMA-F

Auxiliary analog input channels:
• Number of channels: 4
• Nominal sampling rate: 100 ksps
• ADC resolution: 14 bit
• Input voltage range: 0 to +3.5 V
• Input coupling: DC
• Connector: IDC connector

Auxiliary analog output channels:
• Number of channels: 4
• Output type: Low pass filtered PWM
• PWM time resolution: 4ns (1/250 MHz)
• Output voltage range: 0 to +1.8 V

Dimensions: 107 x 60 x 21 mm

Calibration:
Calibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02 % and 0.003 % DC reference voltage standards. Input gains calibration is performed in medium size timebase range. STEMlab 125-14 is non-shielded device and its inputs/outputs ground is not connected to the earth grounding as it is in case of classical Oscilloscopes. To achieve calibration results given below, STEMlab 125-14 must be grounded and shielded.

Inputs      
LV settings (+/- 1 V range)   LV settings (+/- 1 V range)  
DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s
0.2 % +/- 0.5 mV 0.4 % +/- 2 mV
Outputs      
DC offset   DC gain accuracy Ripple @ 0.5V DC
+/- 4 mV   0.4 % 0.4 mVpp

Kit contents:
• 1x STEMlab 125-14 board with calibrated Inputs and Outputs
• 1x LCR meter
• 1x Aluminium case
• 1x micro USB power supply adaptor
• 1x microSD card (4 GB) with pre-installed OS
• 1x Ethernet cable (1 m)
• 2x Osciloscope probes
• 2x SMA to BCN adapter
• 2x 50 ohm termination
• 2x SMA T adapter
• 1x WIFI dongle

Réf. 17937
Constructeur Red Pitaya

Mots clés du produit

Utilisez un espace pour séparer les mots clés. Utilisez l'apostrophe (') pour rédiger une phrase.

Rédigez votre propre commentaire

Quelle note donneriez-vous à ce produit ? *

1 2 3 4 5
Qualité
Valeur
Prix
  • Reload captcha

CONTACTEZ-NOUS